If you just need a sample to check the display’s appearance and quality, we can prepare a special firmware and all you just need to plug in/out with your controller. If you need all real functions, we will check more technical details one by one.

Usually the e-bike displays include OLED, LED, LCD, and TFT, offering different advantages depending on the rider’s needs. Each type varies in terms of visibility, cost and durability,

E-bike displays are not typically interchangeable. The display must match the wiring system and controller specifications of the bike. Using an incompatible display can result in loss of functionality or damage to the system.

For any opening electric system, our display could match when get your protocol, no matter it’s from mainland, Taiwan, Europe or any controller brand. If you do not have a choice, we can also recommend our partners, including battery, motor, controller, even cables brand. We can also provide a solution for a whole set of electric bike kits.

Our display could match all common protocol, including UART and CANBUS.

Generally, all functions could be shown based on your requirement, including battery indicator, headlight, walk assistant, PAS level adjusting, speed, trip/odo, trip time, kmh/mph,etc. Also if you have extra requirements such as app, Bluetooth, GPS navigation, RFID function, etc, we can meet.

Yes, you can test our display sample before you placing your order. In this situation, our engineer could prepare a sample to show all functions automatically, then you can check the functions of our display and the compatibility with your eBike system.

For all our display, there’s a printed number at the back of the display, all you need to do is to provide these datas for us.

First, to check the e-bike's communication protocol (usually UART or CANBUS) and its system voltage (e.g., 36V, 48V). If these do not match between your controller and a new display, it will not be compatible. If the plug of the new display physically fits for the cable of the ebike controller, does that guarantee compatibility? No. A matching plug does not guarantee compatibility. The communication protocol, firmware, voltage, and pin layout (the specific wiring inside the plug) must also align. A mismatch can lead to malfunction or even damage to the display or controller.

If you just need a sample to check the display’s appearance and quality, we can prepare a special firmware and all you just need to plug in/out with your controller. If you need all real functions, we will check more technical details one by one.

Usually the e-bike displays include OLED, LED, LCD, and TFT, offering different advantages depending on the rider’s needs. Each type varies in terms of visibility, cost and durability,

E-bike displays are not typically interchangeable. The display must match the wiring system and controller specifications of the bike. Using an incompatible display can result in loss of functionality or damage to the system.

For any opening electric system, our display could match when get your protocol, no matter it’s from mainland, Taiwan, Europe or any controller brand. If you do not have a choice, we can also recommend our partners, including battery, motor, controller, even cables brand. We can also provide a solution for a whole set of electric bike kits.

Our display could match all common protocol, including UART and CANBUS.

Generally, all functions could be shown based on your requirement, including battery indicator, headlight, walk assistant, PAS level adjusting, speed, trip/odo, trip time, kmh/mph,etc. Also if you have extra requirements such as app, Bluetooth, GPS navigation, RFID function, etc, we can meet.

Yes, you can test our display sample before you placing your order. In this situation, our engineer could prepare a sample to show all functions automatically, then you can check the functions of our display and the compatibility with your eBike system.

For all our display, there’s a printed number at the back of the display, all you need to do is to provide these datas for us.

First, to check the e-bike's communication protocol (usually UART or CANBUS) and its system voltage (e.g., 36V, 48V). If these do not match between your controller and a new display, it will not be compatible. If the plug of the new display physically fits for the cable of the ebike controller, does that guarantee compatibility? No. A matching plug does not guarantee compatibility. The communication protocol, firmware, voltage, and pin layout (the specific wiring inside the plug) must also align. A mismatch can lead to malfunction or even damage to the display or controller.

If you just need a sample to check the display’s appearance and quality, we can prepare a special firmware and all you just need to plug in/out with your controller. If you need all real functions, we will check more technical details one by one.

Usually the e-bike displays include OLED, LED, LCD, and TFT, offering different advantages depending on the rider’s needs. Each type varies in terms of visibility, cost and durability,

E-bike displays are not typically interchangeable. The display must match the wiring system and controller specifications of the bike. Using an incompatible display can result in loss of functionality or damage to the system.

For any opening electric system, our display could match when get your protocol, no matter it’s from mainland, Taiwan, Europe or any controller brand. If you do not have a choice, we can also recommend our partners, including battery, motor, controller, even cables brand. We can also provide a solution for a whole set of electric bike kits.

Our display could match all common protocol, including UART and CANBUS.

Generally, all functions could be shown based on your requirement, including battery indicator, headlight, walk assistant, PAS level adjusting, speed, trip/odo, trip time, kmh/mph,etc. Also if you have extra requirements such as app, Bluetooth, GPS navigation, RFID function, etc, we can meet.

Yes, you can test our display sample before you placing your order. In this situation, our engineer could prepare a sample to show all functions automatically, then you can check the functions of our display and the compatibility with your eBike system.

For all our display, there’s a printed number at the back of the display, all you need to do is to provide these datas for us.

First, to check the e-bike's communication protocol (usually UART or CANBUS) and its system voltage (e.g., 36V, 48V). If these do not match between your controller and a new display, it will not be compatible. If the plug of the new display physically fits for the cable of the ebike controller, does that guarantee compatibility? No. A matching plug does not guarantee compatibility. The communication protocol, firmware, voltage, and pin layout (the specific wiring inside the plug) must also align. A mismatch can lead to malfunction or even damage to the display or controller.

If you just need a sample to check the display’s appearance and quality, we can prepare a special firmware and all you just need to plug in/out with your controller. If you need all real functions, we will check more technical details one by one.

Usually the e-bike displays include OLED, LED, LCD, and TFT, offering different advantages depending on the rider’s needs. Each type varies in terms of visibility, cost and durability,

E-bike displays are not typically interchangeable. The display must match the wiring system and controller specifications of the bike. Using an incompatible display can result in loss of functionality or damage to the system.

For any opening electric system, our display could match when get your protocol, no matter it’s from mainland, Taiwan, Europe or any controller brand. If you do not have a choice, we can also recommend our partners, including battery, motor, controller, even cables brand. We can also provide a solution for a whole set of electric bike kits.

Our display could match all common protocol, including UART and CANBUS.

Generally, all functions could be shown based on your requirement, including battery indicator, headlight, walk assistant, PAS level adjusting, speed, trip/odo, trip time, kmh/mph,etc. Also if you have extra requirements such as app, Bluetooth, GPS navigation, RFID function, etc, we can meet.

Yes, you can test our display sample before you placing your order. In this situation, our engineer could prepare a sample to show all functions automatically, then you can check the functions of our display and the compatibility with your eBike system.

For all our display, there’s a printed number at the back of the display, all you need to do is to provide these datas for us.

First, to check the e-bike's communication protocol (usually UART or CANBUS) and its system voltage (e.g., 36V, 48V). If these do not match between your controller and a new display, it will not be compatible. If the plug of the new display physically fits for the cable of the ebike controller, does that guarantee compatibility? No. A matching plug does not guarantee compatibility. The communication protocol, firmware, voltage, and pin layout (the specific wiring inside the plug) must also align. A mismatch can lead to malfunction or even damage to the display or controller.